Wood Floor Restorer – 2 Quart Pack
Restore And Revitalize Your Hardwood Floors
Bring back the shine of your beautiful hardwood floors with Wood Floor Restorer. Use the Mini Pro Microfiber Wet/Dry pad to apply and perk up your hard wood floors. Wood Floor Restore is a waterborne urethane for use on all un-waxed polyurethane finished wood floors. Easy to use, takes about one hour to restore that new look to your dull wood flooring. 27 oz. – covers approximately 450 square feet.
Includes: 2 Quarts – Ready-To-Use Wood Floor Restorer.
NOTE: Wood Floor Restorer is intended to maintain your floor between professionally applied finish coats. It is not intended to replace a professional finish application on severely damaged floors. Test before use in an inconspicuous area.
Directions for use:
- Sweep or dust mop dry floors to remove excess dirt. Mop floor with neutral cleaner like Clean & Brite. Follow with clean, damp mop to remove any potential residue (even if the cleaner is a no-rinse cleaner). Allow floor to dry completely.
- Rock container gently before applying, do not shake. Apply in a wavy line and spread to a thin coat to cover a small area at a time (approx 4′ x 6′) using a clean, damp microfiber pad or clean finish mop. Use of a contaminated applicator may cause streaking or a cloudy appearance. Container will cover approx. 450 sq. ft. For best results, apply an even, consistent coat, keeping airborne dust and airflow to a minimum while floor is wet.
- Rinse pad/mop thoroughly with hot water after application to remove product residue. Allow 1 hour of dry time before walking on floor and between coats. Repeat application until desired gloss is achieved, applying no more than 3 coats within a 24 hour period. Wait 24 hours before allowing heavy traffic and replacement of furniture or rugs.